Feature:
1. Wireless lavalier microphone, support Bluetooth 5.0+2.4GhZ wireless transmission frequency band, plug and play, automatic pairing.
2. Double microphone standing waves shaping noise reduction processing, signal to noise ratio is 56DB, and the reception is clear.
3. Built in high sensitivity microphone, intelligent noise reduction, blocking surrounding noise, picking up the most clear sound.
4. Small size, light weight, easy to carry, can be directly clipped on your shirt, tie or pocket, wireless connection, clear sound.
5. Support USB OTG5V power supply, widely used in mobile phone live broadcast, interview, indoor and outdoor video recording, etc.
Specification:
Item Type: Lavalier Microphone
Material: ABS
Weight: Approx. 219g / 7.7oz
Wireless Transmission Frequency Band: 2.4Ghz
Wireless Connection Distance: 10M
Power Supply Mode: USB OTG 5V
Power Supply Working Current: 22ma
Charging Compartment Battery Capacity: 1200maH
Battery Type: Lithium Battery
Charging Current of Charging Compartment: DC-5V 1A (MAX)
Mobile Power Bank Output Power: 1A at 5V 5W(MAX)
Standby Current: 100uA
Wireless Transmission Frequency Band: Bluetooth 5.0+2.4GhZ
Microphone Audio Sampling Rate: 16KHZ
Audio Delay: 30ms (2.4G Mode), 100ms (Bluetooth Direct Connection Mode)
Sensitivity: -42db+/-1db
ENC Spray Reduction: Double microphone standing waves forming noise reduction
Signal To Noise Ratio: 56DB
Battery Capacity: 55mah (Built In)
Battery Type: Lithium Battery
Charging Current: 50ma
Working Time: 7-8h
Bluetooth mode and mobile phone direct connection
1: Starting up, turn on and off, paired devices
Insert the receiver into a device with a TYPE-C interface. The receiver"s light is on to indicate that it has been turned on.
1: Power on: Long press the power button on the microphone,
2: Receiving end: Red and blue lights flash alternately to indicate successful startup, write terminal, and device connection
Notice:
1. The mobile phone must have a TYPE C interface and OTG function to make the receiving work
2. Individual brand mobile phones (for OPPO, for ONE PLUS, for VIVO, etc.) are in the default state. The system OTG function is closed, it needs to be turned on in the system settings to make the receiving editor work
3. To connect for IOS mobile phone, you need to use for IOS to TYPE-C OTG conversion interface to use
4. To connect with PC, you need to use USB-A to TYPE-C loss interface for use
3: Connection between the microphone end and the receiving end: When the microphone end and the receiving end are working, the green light on the microphone end and the receiving end is always on to indicate that the connection is successful and to work.
Notice:
1. After the microphone and receiver are successfully connected, for Android end, the microphone transmitter will completely replace the microphone and speaker on the phone, including calls and all APP application scenarios. To use the microphone and speaker on the phone, the receiver must be unplugged .
2. For IOS side, the microphone transmitter will partly replace the microphone and speaker on the mobile phone. For all APP application scenarios except for calls (GSM calls), to use the microphone and speaker on the mobile phone, the receiver must be unplugged
3. The camera APP of some mobile phones can only call the microphone of the mobile phone side, and this product cannot be used as a recording device. In this case, a third party camera APP can be used to solve the problem.
Package List:
1 x Charging Compartment1 x Wireless Microphone1 x Microphone Receiver1 x USB Charging Cable1 x Manual 1 x Microphone Case1 x For IOS Adapter
