Gyro canopy Gyro X Gyro UP 6 hole car 40mm 2 pieces wide tread spacer wheel spacer

340mm wide tread spacer x 2 Mounting bolt x 12 Spacer material: Forged aluminum alloy A6061-T6 (corrosion resistance and strong strength) Bolt material: SCR440 (chrome steel) (excellent durability against bolt deformation, rust, and corrosion caused by heat and vibration during driving) ●Gyro X: 6-hole car ●Gyro UP: 6-hole car ●Gyro Canopy: 6-hole car *Gyro X is limited to current vehicles with a tread width of 430mm. *Since it is for genuine 6-hole cars, it cannot be installed on genuine 4-hole cars/4-hole PCD100 cars/4-hole PCD110 cars *Cannot be installed on 4-stroke gyro type cars By increasing the tread width (wheel width) and registering a minicar, you can change the structure from a 3-wheeled moped to a minicar. Will it be treated as a minicar? If a spacer is installed and the tread width exceeds 500mm, it will be treated as a minicar rather than a three-wheeled moped (minicar registration required). Minicars are treated as regular cars under the Road Traffic Act, so you will need a regular car license to drive them. Numerous benefits of minicar registration Although you will need a regular driver's license, there are many benefits to registering your minicar. ●Benefits 1: Even with 50cc, the legal speed is 60km/h *Originally 30km/h 2: No need for two-stage right turn 3: There is no obligation to wear a helmet. 4: Compulsory automobile liability/voluntary insurance is treated as a “moped” = cheap You will be freed from the various restrictions that come with three-wheeled mopeds. Please register your minicar and drive around town. Extremely easy to install Since it is completely bolt-on, even an amateur can easily install it. ■Compatible car models ●Gyro X: 6-hole car ●Gyro UP: 6 hole car ●Gyro canopy: 6-hole car *Gyro X is limited to current vehicles with a tread width of 430mm. *Since it is for genuine 6-hole cars, it cannot be installed on genuine 4-hole cars/4-hole PCD100 cars/4-hole PCD110 cars. *Cannot be installed on 4-stroke gyro system ■Specifications ●Spacer material: Forged aluminum alloy A6061-T6 (Characteristics include corrosion resistance and strong strength) ●Bolt material: SCR440 (chrome steel) (Steel material selected especially when strength is required) ■Set contents 40mm wide tread spacer x 2 Mounting bolts x 12 ■Notes *Instruction manual and miniature car registration documents are not included. *Since this is for a 6-hole car, please be sure to check the shape of the vehicle before making a bid. Cannot be installed on 4-hole cars. *Please retighten regularly. *We cannot guarantee any malfunction or damage that occurs after installing this product. Thank you for your understanding. We will not be responsible for any direct or indirect damage costs caused by the installation or removal of the product. Thank you for your understanding. -Vehicle compatibility information is as of the time of release of this product. Please note that the product may not operate properly or be compatible depending on subsequent changes or modifications to the specifications of the vehicle.