Hello and welcome to our store. We hope our service can satisfy you and wish you have a pleasant shopping experience!
Model No.: Tile Epoxy Grout
Use for: Wall Putty
Feature 1: Epoxy Putty Adhesive
Feature 2: Sealant
Feature 3: Graffiti Plaster
Feature 4: Hole Scratch Shedding
Feature 5: Crack Repair
Feature 6: Crack Repair Construction Tool
Feature 7: Adhesive Glue Sealant Fix
Feature 8: Wall Adhesive
Feature 9: Strong Adhesive Silane Polymer
Feature 10: Crystalline Adhesive Glue
Size: 3*9CM
Net Content: 60ml
Material: Water, Resin, Aluminum Oxalate
Dry Time: 1H
Summary:
With smooth surface, it contains water and resin composition. It can be used to clean ceramic tiles, preventing tile blackening and mildew.
Instructions:
1. First, clean the dirt in the tile gap. The gap depth is more suitable for 2-3mm. It is recommended that the gap is too large, and then use the tile reformer.
2. Turn the tile upside down and shake for about 20 seconds, tear off the sealed aluminum foil, unscrew the lid, point the nozzle vertically at the tile gap, and squeeze the paste evenly along the gap. Then squeeze out the paste and tear it off after scraping the paste.).
3. Use a small scraper (or quilted ball) to lightly scrape back and forth several times to make the tile evenly enter the gap. It is recommended to apply more times to fill the gap and fill it as much as possible.
4. After scraping, remove the excess paste and let it dry naturally. It is recommended to dry for 2-3 days. It should not be touched during the period.
5, For large or deep gaps, you can apply several times every other day.
Precautions:
1. Please try it on a small area before use, and use it normally after there is no adverse reaction.
2. Depending on the use environment, it takes about 2-3 hours for the tile to harden.
3. After the tile is hardened, avoid washing with water, especially hot water.
4. It can still be used many times after opening, but be sure to seal it to prevent direct sunlight.
5. It should not be used when frozen, avoiding contact with children. ,
6. Do not rub your eyes accidentally. Rinse with water immediately and consult a doctor.
7. If it is not used up after opening, the needle cap should be washed with water before placing, so as not to block the needle mouth with the remaining tile reform and affect the next use.
8. In winter, the temperature is low, the tile may become sticky, it is recommended to soak in hot water before use.
9. Suitable for storage and transportation temperature of -5 ° C to 50 ° C, the outside temperature below minus 10 ° C is not recommended to buy and use, the temperature is too low, it will affect the use of tile reform.
Packing list:
1 x Tile Repair Agent Wall Sealant
