CGP 6-inch 16cm 2-Way Coaxial Speaker with MDF Baffle Set for Toyota Vehicles (CGP-ZD601-16TH)

No instruction manual is included. If you are unsure how to install it, please have it installed at a specialist store. ------------------------------------------------- *As this is a general-purpose product, we cannot answer questions about compatibility. ◆Some speakers may require modification. Please note in advance. We do not provide information on compatibility. Please judge based on the size. ------------------------------------------------- [Examples of compatible vehicles] The baffles in this set are compatible with: Aqua (H23/12~) NHP10 (front/rear); bB (H17/12-H20/10); QNC20/QNC21/QNC25 (front); iQ (H20/10-); KGJ10 (front); Alphard (H20/5-); ANH20W/ANH25W/GGH20W/GGH25W (rear); Ist (H19/7-); NCP110/NCP115/ZSP110 (front); Wish (20 series) (H21/4-); ZGE22W/ZGE20W/ZGE25W/ZGE21G/ZGE20G/ZGE25W (front/rear); Vitz (H17/2-); KSP90/NCP91/NCP95/SCP90 (front); Vellfire (H20/5-). ANH20W/ANH25W/GGH20W/GGH25W rear Voxy (70 series) ZRR7G/ZRR70W/ZRR75G/ZRR75W front Estima (50 series) ACR50W/ACR55W/GSR50W/GSR55W front Estima (30/40 series) ACR30W/ACR40W/MCR3W0/MCR40W front Eutima Hybrid H18/6- AHR20W front Corolla Axio H18/10- NZE141/NZE144/ZRE142/ZRE144 front Corolla Fielder H18/10- NZE141R/NZE144R/ZRE142R/ZRE144R front Corolla Rumion NZE151N/ZRE152N/ZRE154N (Front) - Crown (February 2008-present) GRS200/GRS201/GRS202/GRS203 (Front/Rear) Prius (30 Series) ZVW30 (Rear) Prius (20 Series) NHW20 (Front/Rear) Belta (November 2005-present) KSP92/NCP96/SCP92 (Front) Porte (July 2004-present) NNP10/NNP11 (Front) Mark X (October 2011-present) GRX130/GRX133/GRX135 (Front/Rear) Mark X Zio ANA10/ANA15/GGA10 (Rear) etc. *Please refer to the size chart in the image. [Note] Under no circumstances will we be liable for any costs associated with installation or removal of the product, or for any damage to the vehicle or other parts caused by installation, or damage resulting from detachment while driving. Thank you for your understanding. Set of 2 Coaxials + 2 MDF Rear Baffles Compatible with: Toyota and Daihatsu vehicles. See compatibility examples below. This baffle is designed for use when installing aftermarket speakers. When replacing factory speakers, the inner baffle board reduces vibrations transmitted through the door, enhancing bass and improving sound quality. 16cm Coaxial Specifications: Size: 16cm, Speaker Hole Size: 127mm, Signal-to-Noise Ratio: 90dB, Frequency: 45kHz-22kHz, Impedance: 4 ohms, Maximum Output: 180W, Rated Output: 40W. Dimensions: Woofer: 160mm (Hole Size: 132mm), Tweeter: 28mm Baffle Specifications: Made of wood. Please see images for dimensions. The speaker basket is designed to fit 17cm speaker holes. For 16cm speakers, the round inner holes are for screws. For 17cm speakers, the outer U-shape is the screw hole. The baffle is a product used when installing aftermarket speakers. When replacing factory speakers, the inner baffle board reduces vibrations transmitted to the door, creating a tighter bass tone and improving sound quality. Instructions are not included. If you are unsure how to install it, please have it installed at a specialist shop.