Daiwa Slp Works EX SF Spool 1000SS

[Product Infomation]

Brand : SLPWORKS Materials : Alminium

[Product Description]

・Count: 1000SS / Compatible models: [EXIST SF 1000-2000] [23 AIRITY ST SF 1000-2000] (*Body design exclusively for SF, not compatible with other models)] ・Standard winding amount Fluoro/nylon line: 1.5lb-120m, 2lb-100m, 2.5lb-80m / PE line: No. 0.2-200m ・Self weight: 19g / Maximum drag force: 3kg *This product pursues the ultimate performance as a [SF (super finesse) dedicated machine] that is intended for limited use in "bass fishing, area trout, native trout, and light salt." Therefore, we have made settings that are outside of our normal internal standards, but we ask for your understanding in advance as this is a characteristic of the product. ・*When using this product, if you use it on a model other than the applicable model, wind the line with excessive line tension, tighten the drag knob excessively, wind the line under high load, use a line size other than the specified one, etc., this may lead to spool deformation, rotational problems, or damage, so please set it to the settings recommended by the manufacturer.

Introducing the specially designed SF (Super Finesse) spool model "EX SF (EXIST Super Finesse) Spool" compatible with the ultimate finesse "EXIST Super Finesse (EXIST SF) series" from SLP!!

Equipped with "ATD TYPE-L" and a flagship small spool design with a gorgeous and luxurious design!! Equipped with "AIRDRIVE SPOOL" & "ATD TYPE-L" just like the original. The shorter spool width makes it lighter and more compact, and the line release angle has been reduced, increasing drag release performance by approximately 20%. By lowering the drag MAX to 3kg, it is possible to further fine-tune the drag range that is often used in finesse fishing. We have a lineup of items with a new winding amount of 2500 SSS, and are items that can make the most of the strengths of SF. A winding condition adjustment washer and instruction manual are also included as accessories. Please note that it is not compatible with the target models "conventional LT and RCS models including 22EXIST".

*About the handling of "SF (Super Finesse)"* 〇This product pursues the ultimate performance as a [SF (super finesse) dedicated machine] that is intended for limited use in "bass fishing, area trout, native trout, and light salt." Therefore, we have made settings that are outside of our normal internal standards, but we ask for your understanding in advance as this is a characteristic of the product.

*Notes on handling* 1.Do not wrap with strong tension. Winding the thread with excessive tension will lead to ``spool deformation and rotation problems''. When winding the line, we recommend winding the line at the recommended tension (100g for fluoro/nylon/ester line, 200g for PE line). 2. We recommend a drag setting of 800g or less. Winding the thread under high load may cause rotation problems. Please be especially careful when winding up the reel when the lure is unhooked, and when collecting the lure that has become a mass of algae. Also, be careful not to overtighten the drag knob as this may lead to damage. 3. Compatible line sizes are approximately 4lb for fluoro, nylon, and ester lines, and up to size 0.6 for PE lines. This is a strength standard specific to "SF (Super Finesse)", so please be careful when using it.

[Important Note - For Overseas Customers]

Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.

1. Legislation and safety standards This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country. Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.

2. About electrical products [Voltage compatible] When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.

[Plug type] Our products use the Japanese plug type (A type or B type). Please use a conversion adapter if necessary.

[Important notes regarding transformers and adapters] A transformer adjusts the voltage to suit the requirements of the equipment. Conversion adapters only change the shape of the plug and do not adjust the voltage. Using only the conversion adapter without a transformer may damage the product.

[About responsibility] We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.

3. Language and manual Product instructions and displays may only be in Japanese. The English version of the manual can be downloaded from our website.