NFJ Carefully Made Enclosure Kit Assembly Speaker Kit Peerless Optimized for Adopts Japanese MDF Self-build [MODEL-PLS] PLS-P830985

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.

[About clocks that synchronize time via radio waves] The function of clocks that synchronize time via radio waves only works in the Japanese area. Please be careful. Adopts 9mm thick MDF material (NEO board SLU4-9) handled by Nippon Paper Mokuzai Co., Ltd. Cut by Japanese craftsmen Comes with a guide sheet convenient for drilling Sealed or bass reflex is up to the customer A set with everything you need! *Speaker unit is sold separately! Please purchase separately! * *This kit requires drilling! * Some parts have pre-drilled holes. Front baffle MDF https://www.amazon.co.jp/dp/B081G7F65V Rear opening MDF https://www.amazon.co.jp/dp/B081G9PFL2 This kit is an enclosure kit designed based on the "PLS-P830985" unit. Please purchase this unit as well. https://www.amazon.co.jp/dp/B071GQD8ZC *Units are sold individually* [Kit contents] Enclosure kit guide sheet x1 Board material: 122mm x 104mm x 9mm thick MDF material (made in Japan) x 12 sheets Bass reflex port: Φ26mm x 48mm x 2 Terminal: 2P push terminal x 2 Internal wiring: red and black wiring x 2 Sound absorbing material: Needle felt × 1 piece (cut in half and use) Unit installation screws: Screws (large) x 8 (*) Terminal installation screws: Screws (small) x 4 (*) Insulator: Sponge rubber feet x 8 pieces Emblem: FX-AUDIO-3D emblem (sticker type) x 2 pieces Others: Finishing sandpaper #240 x 1 sheet Finishing sandpaper #400 x 1 sheet (*)Screws are for the basic set. When installing speaker units other than PLS-P830985 or separately sold terminals, please pay attention to the size and quantity, and prepare the ones that do not fit or are missing separately. [Recommended standard design] Format: Rear bass reflex type Completed size: W104mm x H122mm x D140mm Speaker unit: Peerless PLS-P830985 [Required parts/tools] Everything you need ・Speaker unit (2 pieces) ・Woodworking bond (used for adhesion.Konishi woodworking bond, Titebond, etc.) ・A circle cutter (used for opening baffles and bass reflex ports) or an electric drill that can be attached to a hole saw. ・Drill blade (Φ6mm) ・Phillips screwdriver (used for fixing screws on the unit and terminal) ・Solder, soldering iron (used for soldering wiring materials) [Assembly method] Please see here. http://nfjapan.com/manual/enclosure.pdf [Notes] ・Speaker unit is sold separately. Please note that the speaker unit is not included in the set contents. -This product is a self-made kit, so processing and assembly of parts is required. ・For assembly work, consumable materials such as adhesive and solder, and tools such as soldering iron and drill must be prepared separately. ・Since this is an assembly kit, there is basically no warranty. ・If there is a problem with the product before it is assembled upon arrival, we will replace it. ・When painting MDF, it is necessary to apply a primer. Please note that direct painting tends to cause unevenness. - MDF materials may have uneven coloring, some dirt, marks from the original board (markers on the thickness), burrs or cutting marks from processing. Although we have removed items that are of poor quality through inspection, please note that these parts are intended for processing. If you are concerned, please consider the front and back sides. [Product specifications] Material: MDF material Accessories: Complete set of enclosure self-made kit contents (details are listed above) *Speaker unit is not included! Weight: 957g (weight of complete set of parts) Size: W104mm x D140mm x H122mm (*Completed size/not including protrusions)