Sanwa Supply SW-DP31R 3-input, 1-output DisplayPort Switch (8K/30Hz compatible, with remote control)

This DisplayPort switch can switch the DisplayPort output (video and audio) from three computers to a single DisplayPort-equipped display.

Supports resolutions up to 7680x4320 (8K/30Hz), outputting beautiful, high-definition DisplayPort signals. *Does not support HDR (high brightness).

Includes a remote control for easy switching even from a distance.

Switching can also be controlled using the buttons on the switch itself; this fully manual switch does not automatically switch when other DisplayPort devices are started or shut down. *Some DisplayPort devices may require display recognition upon startup. If this occurs, you will need to switch ports before starting the DisplayPort device.

All cables can be oriented in the same direction, allowing for a neat installation.

This product is HDCP1.4 (High-bandwidth Digital Content Protection) compliant.

All DisplayPort terminals are gold-plated, making them rust-resistant and preventing signal degradation.

Supports Dolby True HD and DTS HD Master Audio. ≪Caution≫ *We recommend connecting and using a USB power cable for stable operation. This product is bus-powered, meaning it runs on power from a DisplayPort device. However, you may experience symptoms such as the screen temporarily going dark or the video cutting out when starting up the device. In such cases, connecting a USB power cable and providing a stable power supply to the product may resolve the issue. ≪About the screen display time when switching ports≫ When switching ports, it usually takes about 3 to 5 seconds for the video to appear. This is not a symptom of this product, but rather the time it takes for the DisplayPort device to recognize the display and begin video output, and is dependent on the performance of the DisplayPort device. This product itself completes the port switch the instant the switch button is pressed.

Supported Resolutions: 8K/7680×4320 (30Hz) 3840×2160 (144Hz, 4:4:4) 3840×2160 (120Hz, 4:4:4) 3840×2160 (60Hz, 4:4:4) 3840×2160 (30Hz, 4:4:4) 2560×1440 (60Hz) 2048×1080 (60Hz) 1920×1200 (60Hz) 1920×1080 (60Hz) 1680×1050 (60Hz) 1600×1200 (60Hz) 1280×10 24 (60Hz) 1280×800 (60Hz) 1024×768 (60Hz) 800×600 (60Hz) ■Maximum Resolution: 8K/7680×4320 (30Hz) ■Interface: Input: 3 x DisplayPort Female Output: 1 x DisplayPort Female ■Input DDC Signal: 5V ■Data Rate: 8.1Gbps ■Pixel Clock: 810MHz (Maximum) ■HDCP: HDCP 1.4 *The display must also support HDCP. ■DisplayPort Standard: DisplayPort 1.4 ■Switching Method: Main Unit Switching Button, Remote Control ■Power Consumption: 1.2W (Maximum) ■Environmental Requirements: Operating: 0-50°C, Humidity 80% or Less (Non-condensing) Storage: -20-60°C, Humidity 80% or Less (Non-condensing) ■Dimensions: W116 x D54.6 x H17.8mm ■Weight: Approx. 101g ■Set Contents: Main Unit, Remote Control (CR2025 Battery Included), USB Cable (for Power Supply), Instruction Manual & Warranty Card This DisplayPort switch switches the DisplayPort output (video and audio) from three computers to a single DisplayPort-equipped display. Supports resolutions up to 7680x4320 (8K/30Hz), delivering beautiful, high-definition DisplayPort signals. *HDR (High Brightness) is not supported. Includes a remote control for easy switching, even from a distance. Switching can be performed using the buttons on the main unit, and automatic switching does not occur when other DisplayPort devices are started or shut down; this is a fully manual switching type. *Depending on the DisplayPort device, it may be necessary to recognize the display upon startup. In this case, you will need to switch ports before starting the DisplayPort device. All cables can be arranged in the same direction, allowing for a neat installation.