✅This is an aftermarket carburetor for Yamaha motorcycles, with a manifold valued at ¥1500.
✅Compatible models:
・Yamaha TW200 e (2001-2017)
・200 TRAILWAY (Trailway), etc.
※Please note※
The TW200e and TW2002JL use different carburetors.
When using this on a 2JL TW, all you need is the air cleaner joint (5LB10) from a DG-series TW and the hose clamp (90450-58090) for a simple installation.
✅Accessories: 1x Fuel Hose, 1x Drain Hose, 1x Carburetor, 1x Intake Manifold, 1x Fuel Filter
✅ Bore Size
・ Manifold Side (Outer Diameter) Approx. 33mm (Inner Diameter) Approx. 28mm
・ Air Cleaner Side (Outer Diameter) Approx. 45mm (Inner Diameter) Approx. 42.2mm
Factory-Installed Jet Size
・ Main Jet 112#
・ Slow Jet 35#
Weight
1203g
Overall Size
Length: Approx. 13cm, Width: Approx. 6.5cm
Hose Length
Approx. 35cm
Material: Made from high-quality aluminum for excellent rust resistance, durability, and corrosion resistance.
Rust and corrosion caused by aging can progress rapidly and be invisible to the naked eye.
This may be the cause of reduced torque, unstable idling, and poor fuel economy. Rust and corrosion over time can cause malfunctions.
This product can be used as a replacement if you experience starting problems or a lack of power. We recommend cleaning the inside of the carburetor before use.
We recommend keeping a stockpile of replacement parts.
Product Liability Insurance Covered
・We are insured by Product Liability Insurance, so you can purchase with confidence. ・1-year warranty (conditions apply)! In the unlikely event that you receive a defective product (even if it has been opened or used), please contact us directly by email. We will provide a refund or replacement after confirming the defect.
Notes/Not Covered by Warranty
*Please check before purchasing.
Incompatible products will not be covered by the warranty if you fail to verify the genuine part number or compatible model number.
*Failures due to improper installation or accidents are not covered by the warranty.
*Damage to this product caused by normal wear and tear or aging during use is not covered by the warranty.
*Please note that labor and other costs incurred in replacing a defective product are not covered by the warranty.
*Specifications and design may vary slightly depending on the arrival date and lot. Please note in advance.
*Please note that colors and other aspects may differ slightly from the images shown due to display settings and other factors.
*If you are unsure about installation, please consult a professional shop or professional.
*If using this on another model, install at your own risk.
Please pay attention to the position of the mounting holes and the routing of the throttle cable.
✅This is an aftermarket carburetor for Yamaha motorcycles, and comes with a manifold worth ¥1500.
✅Compatible models: Yamaha TW200 e, TW 200 (2001-2017), 200 TRAILWAY, etc.
*Please note* The tw200e and tw2002JL use different carburetors. If using this on a 2JL tw, all you need is a DG-series tw (5LB10) air cleaner joint and hose clamp (90450-58090) for easy installation.
✅Accessories: Fuel hose x 1, Drain hose x 1, Carburetor body x 1, Intake manifold x 1, Fuel filter x 1
