Approximately 20 times more rust-preventing power Chassis black semi-gloss black rust-preventing paint Can be applied over rust Oil-based 6 pieces

This is a new product developed based on a completely new idea, without sticking to conventional products. In addition to a modified epoxy resin with excellent rust prevention, it is blended with multiple special rust preventive agents that attack rust at different times.It has rust prevention power (SST salt spray test of over 1,000 hours/60㎛) that exceeds that of a one-component type that is comparable to a two-part type, and provides extremely long-term protection against damage from sea breezes, seawater, snow melting agents (calcium chloride), etc. Painting can be done even if the surface is rusted by preparing the surface to level 3 scuffing (removal of top rust). In addition, it can be expected to have overwhelming and effective rust prevention performance compared to rust converters. (Compared to our company) After painting this product, you can apply top coats (overcoats) of various paints. It is effective for use in extremely cold regions where snow-melting agents are sprayed in winter, and in regions facing the sea that are susceptible to salt damage. Chassis, underfloor, wheel house, etc. Anti-rust coating instead of chassis painting during vehicle inspection (even if it is rusted, it's not too late) Effective as a snow melting agent (calcium chloride) and anti-rust coating for vehicles (passenger cars, light cars, light trucks, small trucks, etc.) used in areas prone to salt damage or along railway lines. Even if you paint the surface while it is still a little rusty, the effect will be tremendous and it is never too late. Ideal for touch-up painting on unpainted areas. Used in place of a primer and applied with various top coats, the synergistic effect further enhances the rust prevention effect. For items to be painted for the first time (paint film), please check that there are no defects such as lifting phenomenon (wrinkling of the paint film) in the part to be painted before use. When painting, do not apply thick coats all at once, spray at an appropriate distance of 20 to 30 cm from the object being coated, and apply at least 2 to 3 times at intervals of 20 to 30 minutes. The rust prevention effect is proportional to the thickness of the paint film, but please note that extremely thick coating may cause the paint film to crack or peel. Standard film thickness (dry 50-60μm / about 3 coats of aerosol) *Salt spray test for more than 500 hours After use, turn the container upside down and blow dry for about 2 seconds to prevent the nozzle from clogging, wipe off the paint adhering to the nozzle, attach the protective cap, and store in a cool, dark place.